Zanussi ZBF22451SA 사용자 설명서 - 페이지 5
{카테고리_이름} Zanussi ZBF22451SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBF22451SA 16 페이지.
Zanussi ZBF22451SA에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (16 페이지), 사용자 설명서 (45 페이지)
페이지 인쇄
3. To disconnect the appliance from the pow-
er disconnect the mains plug from the pow-
er socket.
Temperature regulation
The set temperature of the freezer may be ad-
justed by pressing the temperature button.
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set tem-
perature.
The set temperature will be reached within 24
hours.
Important! After a power failure the set
temperature remains stored.
Child Lock function
To lock the buttons from unintentional operation
select the Child Lock function.
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
2. The Child Lock indicator flashes.
3. Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1. Press the Mode button until the Child Lock
indicator flashes.
2. Press the OK button to confirm.
3. The Child Lock indicator goes off.
Fast Freeze function
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The Fast Freeze indicator flashes.
2. Press the OK button to confirm.
The Fast Freeze indicator is shown.
This function stops automatically after 52 hours.
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
www.zanussi.com
To switch off the function before its automatic
end:
1. Press the Mode button until the Fast Freeze
indicator flashes.
2. Press the OK button to confirm.
3. The Fast Freeze indicator goes off.
Important! The function switches off by select-
ing a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature in-
dicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then shows again the set temper-
ature.
4. The alarm indicator continue to flash until
the normal conditions are restored.
When the alarm has returned the alarm indicator
goes off.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be switched off
by pressing any button.
as to remove the typical smell of a brand-new
product, then dry thoroughly.
Important! Do not use detergents or abrasive
powders, as these will damage the finish.
5