Zanussi ZBF6124A 사용자 설명서 - 페이지 8
{카테고리_이름} Zanussi ZBF6124A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZBF6124A 16 페이지.
페이지 인쇄Problem
The temperature in the freezer is
too low.
The temperature in the freezer is
too high.
There is too much frost.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
Technical data
Dimension of the recess
Rising Time
The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
8
Possible cause
The product temperature is too high.
The room temperature is too high.
The Fast Freeze function is switched
on.
The temperature regulator is not set
correctly.
TheFast Freeze function is switched
on.
The temperature regulator is not set
correctly.
The door is not closed correctly.
The product temperature is too high.
Many products are stored at the same
time.
Products are too near to each other.
Food is not wrapped correctly.
The door is not closed correctly.
The temperature regulator is not set
correctly.
Height
Width
Depth
Let the product temperature decrease to
room temperature before storage.
Decrease the room temperature.
Refer to "Fast Freeze function".
Set a higher temperature.
Refer to" Fast Freeze function".
Set a lower temperature.
Refer to "Closing the door".
Let the product temperature decrease to
room temperature before storage.
Store less products at the same time.
Store products so that there is cold air
circulation.
Wrap the food correctly.
Refer to "Closing the door".
Set a higher temperature.
3. If necessary, replace the defective door gaskets. Con-
tact the Service Center.
880 mm
560 mm
550 mm
20 h
Solution