Zanussi ZBF6124A Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Морозильна камера Zanussi ZBF6124A. Zanussi ZBF6124A 16 сторінок.

Друкувати сторінку
Problem
The temperature in the freezer is
too low.
The temperature in the freezer is
too high.
There is too much frost.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".

Technical data

Dimension of the recess
Rising Time
The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
8
Possible cause
The product temperature is too high.
The room temperature is too high.
The Fast Freeze function is switched
on.
The temperature regulator is not set
correctly.
TheFast Freeze function is switched
on.
The temperature regulator is not set
correctly.
The door is not closed correctly.
The product temperature is too high.
Many products are stored at the same
time.
Products are too near to each other.
Food is not wrapped correctly.
The door is not closed correctly.
The temperature regulator is not set
correctly.
Height
Width
Depth
Let the product temperature decrease to
room temperature before storage.
Decrease the room temperature.
Refer to "Fast Freeze function".
Set a higher temperature.
Refer to" Fast Freeze function".
Set a lower temperature.
Refer to "Closing the door".
Let the product temperature decrease to
room temperature before storage.
Store less products at the same time.
Store products so that there is cold air
circulation.
Wrap the food correctly.
Refer to "Closing the door".
Set a higher temperature.
3. If necessary, replace the defective door gaskets. Con-
tact the Service Center.
880 mm
560 mm
550 mm
20 h
Solution