Zanussi ZFT10210WA 사용자 설명서 - 페이지 10

{카테고리_이름} Zanussi ZFT10210WA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFT10210WA 16 페이지.
Zanussi ZFT10210WA에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

This appliance can be installed in a dry, well

ventilated indoor, also in a garage or cellar, but

for optimum performance install this appliance

at a location where the ambient temperature

corresponds to the climate class indicated on

the rating plate of the appliance:

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Levelling

When placing the ap-

pliance ensure that it

stands level. This can

be achieved by two

adjustable feet at the

bottom in front .

Location

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and

the wall unit must be at least 100 mm . Ideally,

however, the appliance should not be posi-

tioned below overhanging wall units. Accurate

levelling is ensured by one or more adjustable

feet at the base of the cabinet.

If the cabinet is placed in a corner and the side

with the hinges facing the wall, the distance be-

tween the wall and the cabinet must be at least

10 mm to allow the door to open enough so

that the shelves can be removed.

Warning!

min.

100 mm

15 mm

It must be possible to disconnect the appliance

from the mains power supply; the plug must

therefore be easily accessible after installation.

Door reversibility

Important! To carry out the following

operations, we suggest that this be made with

another person that will keep a firm hold on the

doors of the appliance during the operations.

To change the opening direction of the door,

do these steps: