Zanussi ZFT11100XA 사용자 설명서 - 페이지 9

{카테고리_이름} Zanussi ZFT11100XA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZFT11100XA 16 페이지. Zanussi freezer user manual
Zanussi ZFT11100XA에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Problem

The appliance does not

cool at all

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "In-

stallation".

Installation

Caution! Read the "Safety Information"

carefully for your safety and correct

operation of the appliance before installing the

appliance.

Positioning

This appliance should be installed in a dry, well

ventilated indoor where the ambient tempera-

ture corresponds to the climate class indicated

on the rating plate of the appliance:

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Some functional problems might occur for some

types of models when operating outside of that

range. The correct operation can only be guar-

anteed within the specified temperature range. If

you have any doubts regarding where to install

the appliance, please turn to the vendor, to our

customer service or to the nearest Service Cen-

tre

www.zanussi.com

Possible cause

There is no voltage in the mains

socket (try to connect another ap-

pliance into it)

Plug is not connected to the mains

socket properly

There is no voltage in the mains

socket (try to connect another ap-

pliance into it)

The appliance is not switched on

Call an electrician

Connect the mains plug properly

Call an electrician

Switch on the appliance

3. If necessary, replace the defective door

gaskets. Contact the Service Center.

Levelling

When placing the ap-

pliance ensure that it

stands level. This can

be achieved by two

adjustable feet at the

bottom in front .

Location

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and the

wall unit must be at least 100 mm . Ideally, how-

ever, the appliance should not be positioned

below overhanging wall units. Accurate levelling

is ensured by one or more adjustable feet at the

base of the cabinet.

If the cabinet is placed in a corner and the side

with the hinges facing the wall, the distance be-

tween the wall and the cabinet must be at least

Solution