Zanussi ZYAN8FW0 사용자 설명서 - 페이지 8

{카테고리_이름} Zanussi ZYAN8FW0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZYAN8FW0 21 페이지.
Zanussi ZYAN8FW0에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

2. Connect the wire coloured blue to the terminal

either marked with the letter "N" or coloured

black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or coloured

red.

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure over

the outer sheath.

Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse (B).

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

RUBBER SUPPORTING PAD

There is no need to install this additional equipment

provided in a bag to your appliance during normal

use.

However, there is a risk the appliance become

unstable when all food products are placed only on

door shelves. In this case install the rubber

supporting pad:

1. Tilt the appliance carefully on a soft foam

packaging or similar material to avoid any

damage to the back of the appliance and the

floor.

2. Find a hole in a lower base cover and insert a

screw into the rubber supporting pad.

3. Screw it to the base cover with a cross

screwdriver.

DOOR REVERSIBILITY

WARNING! Before carrying out any

operations, remove the plug from the

power socket.

1. Make sure the appliance stands upright.

2. Open the door and remove the door

equipment. Refer to "Daily Use" chapter. Close

the door.

3. Unscrew the screws on the back of the top

cover.

4. Lift the top cover and place it on a soft surface.

5. Unscrew the 4 screws.

6. Lift the upper hinge and put it in a safe place

together with the screws.

7. Lift the door and put it on a soft surface.

8. Tilt the appliance carefully on a soft foam

packaging or similar material to avoid any

damage to the back of the appliance and the

floor.

9. Unscrew the screws of the bottom hinge and

adjustable feet.