Zanussi ZHC 925 지침 책자 - 페이지 11

{카테고리_이름} Zanussi ZHC 925에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC 925 21 페이지. Cooker hood
Zanussi ZHC 925에 대해서도 마찬가지입니다: 지침 책자 (20 페이지)

페이지 인쇄

Please ensure that when the appliance is

installed it is easily accessible to an

engineer in the event of a breakdown.

All installations must comply with the

local authorities requirements for the

discharge of exhaust air.

Incorrect installation may affect the

safety of this cooker hood.

Installation Requirements

Before installation check that the wall

to which the cooker hood is to be fitted

for electric cables, water and gas

pipes.

This cooker hood is designed to be fixed to

any vertical surface over a cooking area, and

can be used in the extraction (ducted to the

outside) or recirculation mode.

The installation work must be undertaken by a

qualified and competent person.

INSTALLING THE COOKER HOOD

Fig. 5

The manufacturer disclaims any responsibility for

damage due to incorrect installation of the cooker

hood or if the hood is not installed in compliance with

relevant regulations controlling this type of

installation.

Unpacking

The hood is supplied with the following

components for installation as illustrated in Fig. 5:

•

Ducting spigot 150 to 120mm (A)

•

Ducting flange 120 to 125mm (B)

•

Canopy (C)

•

2 Recirculation grilles (G)

•

Lower chimney stack 728.5mm (I)

•

Recirculation ducting (P)

•

Recirculation spigot extensions (P1)

•

Recirculation spigot (R)

•

Upper chimney stack 215mm (S)

•

Wall fixing brackets (2)

•

Document pack.