Zanussi ZHC 925 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny Zanussi ZHC 925. Zanussi ZHC 925 21 stron. Cooker hood
Również dla Zanussi ZHC 925: Instrukcja obsługi (20 strony)
Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Installation Requirements
Before installation check that the wall
to which the cooker hood is to be fitted
for electric cables, water and gas
pipes.
This cooker hood is designed to be fixed to
any vertical surface over a cooking area, and
can be used in the extraction (ducted to the
outside) or recirculation mode.
The installation work must be undertaken by a
qualified and competent person.
INSTALLING THE COOKER HOOD
2
A
B
P
Fig. 5
G
C
P1
R
The manufacturer disclaims any responsibility for
damage due to incorrect installation of the cooker
hood or if the hood is not installed in compliance with
relevant regulations controlling this type of
installation.
Unpacking
The hood is supplied with the following
components for installation as illustrated in Fig. 5:
•
Ducting spigot 150 to 120mm (A)
•
Ducting flange 120 to 125mm (B)
•
Canopy (C)
•
2 Recirculation grilles (G)
•
Lower chimney stack 728.5mm (I)
•
Recirculation ducting (P)
•
Recirculation spigot extensions (P1)
•
Recirculation spigot (R)
•
Upper chimney stack 215mm (S)
•
Wall fixing brackets (2)
•
Document pack.
11
S
G
I