Clarke CFP9HND 운영 및 유지 관리 지침 - 페이지 10
{카테고리_이름} Clarke CFP9HND에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CFP9HND 20 페이지.
페이지 인쇄
STOPPING THE COMPRESSOR
At the end of the day, stop the engine in accordance with the instructions in the
engine manual, then open the drain cock.
1.
Turn the regulator fully anticlockwise.
2.
Operate the air tool trigger or operating lever etc., to ensure there is no pressure
in the air line, then disconnect airline and tool.
DO NOT under any circumstances attempt to remove the air tool or disconnect
the air hose until you are satisfied that the pressure has been relieved.
3.
Finally, close the drain cock.
Take care not to touch the engine or pump as they remain hot for some time after
use.
REPLACEMENT OILS
Replacement oils are available from your Clarke dealer as follows:
1 litre of Compressor pump oil - Part No. 3050796
1 litre of Engine oil - Part No. 3050852
- 10 -