Clarke CHT746 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CHT746에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CHT746 8 페이지. Telescopic spring compressor

7. Use a 19mm hex socket to turn the hexagonal drive nut until the yokes are

firmly in contact with the spring.

8. Now continue to compress the spring.

WARNING: AIR TOOLS MUST NOT BE USED TO ADJUST THE SPRING

COMPRESSOR. USE OF AIR TOOLS WILL INVALIDATE THE WARRANTY.

WARNING: DO NOT ALLOW THE SPRING WINDINGS TO TOUCH. DO NOT

ALLOW THE COMPRESSOR TO REACH THE LIMIT OF ITS TRAVEL IN EITHER

DIRECTION.

9. Remove the spring and compressor assembly from the vehicle as soon as

you have attained sufficient compression.

10. With the spring supported turn the hexagonal drive nut in the opposite

direction and remove the compressor and yokes from the spring.

11. To re-mount the spring, reverse the procedure.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]