Alecto DBX-85 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Alecto DBX-85에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alecto DBX-85 7 페이지. 1.8ghz dect baby monitor, talk back, with nightlight
Alecto DBX-85에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
Charger
Basic Steps to Install
1. Connect the output plug of the mains adapter to the DC socket on
the side of the baby unit and the mains adapter to the wall mains
supply.
2. Plug the charger adaptor for the Parent Unit into the mains power
socket.
3. Remove the battery door on the Parent Unit by lifting the battery
door outward from the bottom.
Charge LED
4
4. Insert 2 x AA rechargeable batteries, observing their polarities, into
the battery compartment on the Parent Unit.
5. Replace the battery door on the Parent Unit.
6. Place the Parent unit on the charger to charge. The red Led on the
charger will turn on
7. Let the batteries charge for a full 16 hours before using for first time
installation.
Note: The baby unit also works on battery power. You can insert 4 x
1.5V AA Alkaline batteries in the battery compartment on the
Baby Unit. In case of power interruption, the baby unit continues
to work on battery power. If the baby unit is on battery power,
Battery is displayed, together with the battery icon and current
temperature, on idle mode.
Belt clip
User can also attach the belt clip to the Parent Unit.
To attach:
To remove:
Press the inner wall of the belt clip upward and lift the belt clip outward.