Alecto DBX-85 Owner's Manual - Page 4
Browse online or download pdf Owner's Manual for Baby Monitor Alecto DBX-85. Alecto DBX-85 7 pages. 1.8ghz dect baby monitor, talk back, with nightlight
Also for Alecto DBX-85: User Manual (20 pages)
Print Page
Charger
Basic Steps to Install
1. Connect the output plug of the mains adapter to the DC socket on
the side of the baby unit and the mains adapter to the wall mains
supply.
2. Plug the charger adaptor for the Parent Unit into the mains power
socket.
3. Remove the battery door on the Parent Unit by lifting the battery
door outward from the bottom.
Charge LED
4
4. Insert 2 x AA rechargeable batteries, observing their polarities, into
the battery compartment on the Parent Unit.
5. Replace the battery door on the Parent Unit.
6. Place the Parent unit on the charger to charge. The red Led on the
charger will turn on
7. Let the batteries charge for a full 16 hours before using for first time
installation.
Note: The baby unit also works on battery power. You can insert 4 x
1.5V AA Alkaline batteries in the battery compartment on the
Baby Unit. In case of power interruption, the baby unit continues
to work on battery power. If the baby unit is on battery power,
Battery is displayed, together with the battery icon and current
temperature, on idle mode.
Belt clip
User can also attach the belt clip to the Parent Unit.
To attach:
To remove:
Press the inner wall of the belt clip upward and lift the belt clip outward.