Alecto DBX-85 Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Baby Monitor Alecto DBX-85. Alecto DBX-85 7 pages. 1.8ghz dect baby monitor, talk back, with nightlight
Also for Alecto DBX-85: User Manual (20 pages)
Print Page
•
Press
button to increase or
levels of sensitivity. When all five green LEDs are lit, it represents
the highest sensitivity. When only one green LED is lit, it represents
the lowest sensitivity.
Adjust Volume
There are 5 volume levels on each Unit and there is also an Off setting
on the Parent Unit.
On the units,
•
Press the volume up button (
Unit) to increase the volume or the volume down button(
Baby Unit,
for Parent Unit ) to decrease the volume.
Note: You cannot switch the volume off on the Baby Unit.
Changing the volume setting on the Baby Unit will also affect the
volume while talk back.
Talk Back
User can use the talk back feature to talk to the baby.
•
Press and hold
on the parent unit.
•
The green link LED on both Units will flash.
•
Talk into parent unit microphone.
•
To hear your baby again, release
Paging
If the Parent Unit is misplaced and the volume is off, you can use the
page button on the Baby Unit to locate the Parent Unit.
•
Press
. The Parent Unit will automatically reset to
medium volume level and the paging alert will sound.
to decrease. There are five
for Baby Unit,
for Parent
for
.
•
To stop the paging alert, press any button on the Parent Unit or
press
Nightlight
•
Press
on the Baby Unit to turn nightlight on.
•
The starry nightlight will turn on.
•
Press
again, the starry nightlight on the Baby Unit dims and
gradually turns off.
Out of Range
When the baby and parent units lost the link with each other (eg. Out of
range, parent unit or Baby unit is not powered on), the green Link LED
flashes. If the link cannot be established within 30 seconds, the red
Link LED will flash. Link break alert tone will also emitted from the
speaker of the parent unit every 30 seconds. When the units are linked,
the green Link LED will be steadily lit.
Note: Link break alert can be suppressed for 3 minutes by pressing any
button.
Low Battery
Baby Unit
When the unit is running on battery power and reaches low battery
level, the red low battery LED will turn on. Once the low battery level is
reach, the baby unit should still be able to operate for an hour.
Parent Unit
When the batteries on the parent unit reach a low level, the battery low
led flashes red. The low battery alert tone will be emitted from the
speaker every 60 seconds. Once the low battery level is reached, the
parent unit should still be able to operate for an hour. The low battery
LED and alert tone will be turned off when fully charged batteries are
being replaced.
Note: Low battery alert can be suppressed by pressing any button.
6
again.