Alecto DVM-65 사용자 설명서 - 페이지 10

{카테고리_이름} Alecto DVM-65에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alecto DVM-65 16 페이지.

페이지 인쇄

While adjusting, the volume level will be indicated on the display and

the icon

0 (no sound).

Switching on/off automatically: (VOX)

You can set the parent unit to turn off when the baby is sleeping quietly

and the baby unit is not detecting any sound, and let it turn on again as

soon as the baby starts to cry.

Here you can set the trigger level for turning on images and sound:

1. Press the M button and use the

option

2. Use the

level:

3. Press the M button to save your settings and leave the menu.

Switching the display on/off manually:

When the display is turned off because no sound is being detected,

but you would still like to check, you can briefly press the

temporarily switch on the display. Press the

display off.

Leaving the display switched on continuously:

If you don't want the display to turn off automatically when no sound is

being detected, follow these steps:

1. 1. Press the M button and use the

option.

2. Use the

X: display is always turned on

V: display will turn off when no sound is being detected

3. 3. Press the M button to save your settings and leave the menu

Talking back:

With the display switched on, press the TALK button to talk back to your

baby. Keep the button depressed for as long as you are speaking and

release the button to listen.

You can adjust the volume at the baby unit using the

will appear in the upper part when the volume level is set to

and

buttons to decrease or increase the sensitivity

low sensitivity, the parent unit turns on only when loud

sounds are being detected

high sensitivity, the parent unit also switches on when

low sounds are being detected

: maximum sensitivity, the parent unit remains switched on

and

to switch between:

button to scroll to the

button again to turn the

button to select the

button to

buttons.