Alecto DVM-65 사용자 설명서 - 페이지 11

{카테고리_이름} Alecto DVM-65에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alecto DVM-65 16 페이지.

페이지 인쇄

Zoom function:

Press the

button to turn on the zoom function (moving the image

somewhat closer) and press the

When the zoom function is switched on, the

upper part of the display.

With the zoom function activated, press and hold the , ,

ton to move the image to the left, to the right, up or down (attention: the

camera doesn't actually move, the display merely shows another part of

the available image).

Brightness:

1. Press the M button and use the

option.

2. Press the

brightness.

3. Press the M button to save your settings and leave the menu.

Temperature display:

The upper right corner of the parent unit's display shows the tempe-

rature of the baby's room. You can set this display to be expressed in

degrees Celsius or in degrees Fahrenheit:

1. Press the M button and use the

2. Use the

and

3. Press the M button to save your settings and leave the menu.

Don't forget that the temperature is only an indication.

Multi-camera: (also see chapter 5)

In case you have registered multiple cameras on the parent unit, you

can follow the steps below to manually switch to another baby unit or to

automatically show the images of all registered baby units one after the

other:

1. Press the M button on the parent unit and use the

select the option: the display will now indicate the numbers of all

registered cameras.

2. Use the

and

select

to show all registered cameras one after the other, and

press the M button.

The unit does NOT automatically switch to a camera where

sound is being detected.

and

buttons to decrease or increase the display

buttons to switch between °C and °F.

buttons to select the camera you want to view or

button to turn off the zoom function.

icon will appear in the

button to select the

button to select the option.

but-

button to