Clarke VE Ranges 운영 및 유지 관리 지침 - 페이지 10

{카테고리_이름} Clarke VE Ranges에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke VE Ranges 17 페이지.

c. CONDOR Pressure Switch Type MDR3

The cover is removed by unscrewing the two securing screws - one at each side,

and pulling off the cover complete with rotary switch.

A. PRESSURE ADJUSTMENT:

To increase the cutout pressure, turn the hexagon (A) on top of the pressure switch

clockwise using a screwdriver.

To reduce the cut out pressure, turn it anticlockwise.

B. RANGE ADJUSTMENT:

Pressure differential between cut in and cutout, is preset and should not tampered

with.

ENGINE DRIVEN MACHINES

Air Governor

- Pressure unloading genie

Air Delivery Pipe from Compressor Pump.

Bleed Valve

Exhaust Filter

Pressure Adjustment Knob

Lock Nut.

To adjust pressure slacken lock nut (5).Turn pressure adjusting knob (4) clockwise

to increase pressure,anti-clockwise to decrease. Tighten lock nut (5) when correct

pressure isobtained.

Do not exceed the maximum working pressure of the machine, as marked on

An information sheet

for this component is

provided with the

m a c h i n e ' s

documentation

(Except CFP9BH - see page 12)

WARNING:

the CLARKE AIR specification plate.

Fig.5