Clarke VE Ranges 운영 및 유지 관리 지침 - 페이지 11
{카테고리_이름} Clarke VE Ranges에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke VE Ranges 17 페이지.
페이지 인쇄
OUTLET PRESSURE ADJUSTMENTS
CFP9BH
1.
Pressure Adjusting Knob
2.
Lock Nut
3.
Air Outlet
4.
Bleed Hole
To adjust outlet pressure
clockwise to increase outlet pressure, anticlockwise to decrease. Tighten lock nut
(2) when correct pressure is obtained.
NOTE:
1.
When Compressor reaches cut-out pressure air will bleed from bleed hole (4).
2.
Item (3) quick fit nut can be removed if required and hose can be fitted using
1/4 BSP nut.
PORTABLE COMPRESSORS
1.
Pressure Adjusting Knob
2.
Outlet Taps
3.
Quick Fit Nuts
4.
Pressure Gauge
To adjust outlet pressure:
To increase pressure - turn knob (1) clockwise.
To decrease pressure - turn knob (1)
anticlockwise.
Outlet taps
- slide knurled section (2) away
from body to open, push towards body to
close.
NOTE: Pressure Gauge (4). Pressure shown will differ by approximately 1 bar
depending on whether the outlets are open/closed.
STATIONARY COMPRESSORS
These machines are not supplied with the facility to adjust outlet pressure. A
comprehensive range of airline accessories is available from your local CLARKE
stockist.
- slacken lock nut (2). Turn Pressure Adjusting Knob (1)
12
Fig.6
Fig.7