Blackberry Radar H2 설치 매뉴얼 - 페이지 10

{카테고리_이름} Blackberry Radar H2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackberry Radar H2 28 페이지. Dry van, insulated trailers roll-up doors
Blackberry Radar H2에 대해서도 마찬가지입니다: 설치 매뉴얼 (33 페이지), 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (25 페이지), 설치 매뉴얼 (32 페이지), 설치 매뉴얼 (30 페이지), 설치 매뉴얼 (33 페이지), 설치 매뉴얼 (34 페이지), 설치 매뉴얼 (35 페이지), 사용 설명서 (33 페이지), 설치 매뉴얼 (32 페이지), 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (25 페이지)

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

3.4 Module installation

You may install the module on any flat, vertical or horizontal surface that offers enough

mounting area for the module. When selecting a mounting location, carefully consider how the

asset will be used during its normal, day-to-day operation.

Do not place the module in a location where it is susceptible to damage from:

•

Normal usage activities, such as loading or unloading cargo.

•

Moving parts of the asset.

•

Road debris.

IMPORTANT: For accurate tracking, orientation matters.

1. You may install the module horizontally or vertically.

2. When mounting on a vertical surface, always ensure the module is installed with the

triangle for your desired orientation, pointing up.

3. Full 360° rotation around vertical axis are supported.

NOTE: Installation on the front surface of a trailer or container is not recommended.

Vibration from the tractor's engine or trailer mounted refrigeration, heating and

generator units may result in false motion alerts.

4. You may also rotate the module 90 degrees along the horizontal axis, and mount on an

upward facing surface of the asset, with a clear view to the sky. This is helpful for

installing on roofs, fender surfaces, etc.

5. Do not install the module on the asset with the front of the module facing the ground.

This will result in reduced product performance.

This diagram illustrates the supported installation orientations for the BlackBerry Radar H2

module.

FLATBED AND HEAVY EQUIPMENT