Aleko Victoria Series 설치 및 사용 설명서 지침 - 페이지 6
{카테고리_이름} Aleko Victoria Series에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aleko Victoria Series 12 페이지. Sizes 6.5x5 8x6.5 10x8
Aleko Victoria Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 조립 설명서 (14 페이지), 설치 매뉴얼 (17 페이지)
페이지 인쇄
Page 5
12. Setting position of whole awning: Make sure two arms are tied tightly to torsion bar,
move front bar wrist support (Q-1) until it connects with arms' hole. Align the front bar and
roller, tighten bolt (Q-2) of two Arm-Bar Link upwardly by screwdriver. Then fasten self
locking nut M10 +Washer Ø10(Q-3) with bolts up to 95% tight using ribbon tube spanner.
Lastly, Blocker (P) in centre of two arm, fasten it when awning is opened.
13. FAQ: What if the fabric wraps unevenly or the two arms cannot open together at the
same time?
Answer: Look at the stability of two arms and adjust the front bar wrist of the faster arm
outwards accordingly.
Product name
Retractable
awning
(Please see
details on the
package)
The lifespan of the product is 5 years (assuming the frame is opened and closed twice a
day).
Only screws for reinforced concrete walls and brick walls are provided. If you want to
install the product on a wooden wall, please seek advice from professional installer.
Important: Read "Instructions for installation and operation" carefully before installation. Keep the
instruction in a safe place for future reference.
Insert in
Tight
Specification
Material and surface
treatment
Materials: Steel tube,
Aluminum alloy, plastic
parts, polyester fabric.
Service treatment :
tubes: spray paint and
oxidation
Cloth surface: PU, UV,
waterproof
Applicable wall
Recommended
type
installation
height
Reinforced
concrete walls,
8 ft ~ 12 ft
brick walls, and
wooden walls
Tight
Applicable weather
The products are
used to shield
sunshine. Applicable
when wind is under
level 5. Not suitable
for rainy weather.