Clarke CONTRACTOR CON300 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke CONTRACTOR CON300에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CONTRACTOR CON300 17 페이지. Electric sander

PREPARATION

WARNING!

Disconnect the plug from the power source before fitting/changing the

sandpaper.

FITTING THE SANDPAPER

To fit the sandpaper, proceed as follows:

Lift the clamp lever, see figure 1.

Insert the end of the sandpaper

and push the clamp lever down.

Fold the sandpaper around the

vibrating plate, ensuring the

holes on the sandpaper are

aligned with the holes on the

vibrating plate, see figure 2.

Insert and clamp the other end

of the sandpaper to the other

end of the sander.

WARNING!

When using the orbital sander, certain materials will generate harmful

or toxic dusts and grit. Contact with or inhalation of these dusts can

endanger the health of the operator and bystanders, see general

safety rules for appropriate personal protective equipment.

Fig 1

Clamp

Lever

Fig 2

Clamp

Lever