Clarke CONTRACTOR CON300 Руководство по эксплуатации и техническому обслуживанию - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Сандер Clarke CONTRACTOR CON300. Clarke CONTRACTOR CON300 17 страниц. Electric sander
Печатать страницу
PREPARATION
WARNING!
Disconnect the plug from the power source before fitting/changing the
sandpaper.
FITTING THE SANDPAPER
To fit the sandpaper, proceed as follows:
1.
Lift the clamp lever, see figure 1.
2.
Insert the end of the sandpaper
and push the clamp lever down.
3.
Fold the sandpaper around the
vibrating plate, ensuring the
holes on the sandpaper are
aligned with the holes on the
vibrating plate, see figure 2.
4.
Insert and clamp the other end
of the sandpaper to the other
end of the sander.
WARNING!
When using the orbital sander, certain materials will generate harmful
or toxic dusts and grit. Contact with or inhalation of these dusts can
endanger the health of the operator and bystanders, see general
safety rules for appropriate personal protective equipment.
Fig 1
Clamp
Lever
Fig 2
Clamp
Lever