Clarke CROS1 운영 및 유지 관리 지침 - 페이지 5

{카테고리_이름} Clarke CROS1에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CROS1 12 페이지. Rotary orbital sander
Clarke CROS1에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (13 페이지)

페이지 인쇄

Electrical Connections

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for

connection to a standard, domestic electrical supply. Should the plug need changing at

any time, ensure that a plug of identical specification is used.

This appliance is Double Insulated, and the two wires in the mains lead should

be wired up in accordance with the following colour code:

•

Connect the BLUE coloured cord to the plug terminal marked a letter "N"

•

Connect the BROWN coloured cord to the plug terminal marked a letter "L"

If this appliance is fitted with a plug which is

moulded on to the electric cable (i.e. non-

rewireable) please note:

1. The plug must be thrown away if it is cut

from the electric cable. There is a

danger of electric shock if it is

subsequently inserted into a socket

outlet.

2. Never use the plug without the fuse

cover fitted.

3. Should you wish to replace a detachable

fuse carrier, ensure that the correct

replacement is used (as indicated by

marking or colour code).

4. Replacement fuse covers can be obtained from your local Clarke dealer or most

electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (5 amps) and this

replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.

CABLE EXTENSION.

Always use an approved cable extension suitable for the power rating of this tool (see

specifications), the conductor size should also be at least the same size as that on the

machine, or larger. When using a cable reel, always unwind the cable completely. If using

tool outdoors, only use extension cables intended for outdoor use.

WARNING

BLUE

NEUTRAL

BROWN

LIVE

-5-