Clarke CSR310 운영 및 유지보수 지침 매뉴얼 - 페이지 8
{카테고리_이름} Clarke CSR310에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSR310 17 페이지. Sanding roller
페이지 인쇄
BEFORE USE
WARNING: BEFORE FITTING ACCESSORIES MAKE SURE THAT THE TOOL IS
SWITCHED OFF AND UNPLUGGED.
FITTING THE SPARK DEFLECTOR
ASSEMBLY
1. Slide the spark deflector along the
grooves on the sanding arm.
2. Tighten the knurled screw.
ADJUSTMENT
1. When the spark deflector is
mounted it can be adjusted to
one of four positions as required
by the user.
2. Push the spark deflector into the
required position around the
sanding arm.
FITTING AND REMOVING ACCESSORIES
1. Press the spindle lock button.
2. Remove the securing screw with
the hex key provided.
3. Push the sanding accessory onto
the tool holder.
4. Secure by refitting the securing
screw.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8