Clarke CSR310 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke CSR310에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSR310 17 페이지. Sanding roller

NOTE: Sanding accessories can only be fitted one way. The sanding

accessory must slide on easily. Do not attempt to force it onto the tool

holder. Check the correct direction of the sanding accessory.

5. Fit the sanding roller as described

above.

6. Press the spindle lock button and

turn the sander by hand until the

spindle lock engages.

7. Turn the sanding belt anti-

clockwise along with the slots on

the sanding roller.

DUST EXTRACTION

CAUTION: HARMFUL OR TOXIC DUST MAY BE PRODUCED WHEN

SANDING LEAD PAINTED SURFACES, WOODS OR METAL. CONTACT

WITH, OR INHALATION OF THESE DUSTS CAN ENDANGER THE HEALTH OF

THE OPERATOR OR BYSTANDERS. CERTAIN DUSTS LIKE OAK AND BEECH

ARE CONSIDERED TO BE CANCEROUS IN CONJUNCTION WITH

ADDITIVES IN WOOD TREATMENTS (CHROMATE, WOOD PRESERVATIVES).

ASBESTOS-CONTAINING MATERIALS MAY ONLY BE HANDLED BY EXPERTS.

CAUTION: - USE A DUST EXTRACTION DEVICE OR A VACUUM CLEANER.

CAUTION: - WORK IN A WELL VENTILATED ROOM. - THE USE OF A DUST

MASK FILTER CLASS P2 IS RECOMMENDED. - OBSERVE LOCAL

REGULATIONS REGARDING THE HANDLING OF CERTAIN MATERIALS.

Use a dust extraction device or a vacuum cleaner to remove dust from the

sanding accessory.

1. Slide the dust extraction adapter into the spark deflector.

2. Connect the suction hose (not

included) to the dust extraction

adapter. Use the supplied reducer

ring if necessary.

3. Use a suitable dust extraction

device when toxic, carcinogenic

or fine dust is produced. Any

Clarke dust extractor would be

suitable.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]