Clarke DWS180 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke DWS180에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke DWS180 17 페이지. Hand held drywall sander

DUST COLLECTION

1. Ensure the sander is switched off.

2. Connect hose onto the dust

extract port on the underside of

the sander trigger handle.

3. Connect opposite end of hose

onto dust collection bag.

NOTE: The dust bag must be

emptied regularly:- do not

wait until it is completely full.

The dust bag is emptied as follows.

1. Ensure the sander is switched off.

2. Gently remove the dust bag from

the hose.

3. Take the dust bag to the dustbin

and slide the clip off the bag,

empty the bag into the bin.

4. Reassemble the dust bag and clip

and fit back on to the hose.

1. Plug into the mains socket and

switch on,

2. Set speed of sander, see page 11

3. Place the sanding disc on the

workpiece.

• Hold the sander firmly with both

hands.

4. Squeeze the trigger.

• Allow to get up to speed

before working gently across the workpiece until smooth.

5. Release the trigger.

• Wait until the motor has stopped fully before putting the sander

down.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]