Clarke METALWORKER CBB200E 운영 및 유지보수 지침 매뉴얼 - 페이지 5
{카테고리_이름} Clarke METALWORKER CBB200E에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke METALWORKER CBB200E 13 페이지. 550w buffer/polisher
페이지 인쇄
3. Avoid polishing dissimilar metals with the same buffing wheel; galvanic
corrosion may occur.
4. DO NOT touch the workpiece immediately after polishing as it may be very
hot.
5. DO NOT touch the buffing wheel whilst operating or whilst plugged into the
mains power.
6. DO NOT leave the buffer/polisher running unattended.
7. DO NOT operate the buffer/polisher when you are tired or under the
influence of alcohol, drugs or intoxicating medication.
8. When not in use, switch the buffer/polisher off and remove the plug from
the power supply.
SAFETY SYMBOLS
The above symbols may appear on the machine.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Read the manual
and safety
instructions before
use
Ear protection
should be worn
Hazard - motor gets
hot
5
Eye protection
should be worn
Dust mask should be
worn