Aleko 690L 사용 설명서 - 페이지 5

{카테고리_이름} Aleko 690L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aleko 690L 12 페이지. Drywall sander
Aleko 690L에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

www.AlekoDrywallSander.com

6. Installation & Sandpaper Replacement (Fig.2)

Fig .2

Note: Prior to installation or removing the sandpaper, make

sure to not only switch off the device, but also cut off the power

supply.

Installation Guide

To ensure the replacement procedures, place the device on the smooth ground prior to installation. Take

the sandpaper from the toolbox, and then fix it onto the disk (see Fig .2). The back of the sandpaper (Item

1) will automatically glue with the disk/adhesive disk (Item 2), making both connection and

conduction available.

In order to promote the grinding efficiency, it is necessary to change the sandpaper after the device has

been operational for a certain period. Firstly, switch off the device and disconnect the socket. Then,

remove the previous sandpaper entirely from the disk, so as to lay new sandpaper neatly as well as

facilitate future replacement. At last, fix new sandpaper in position.

Sandpaper Overview

Grinding towards the target wall and object is possible with abrasive grains and sandpaper twisting upon

operations. The sandpaper is classified into various categories according to its dimensions. It is

recommended to select the sandpaper in accordance with actual size of the disk. The more abrasive

grains included on the sandpaper, the better flatness and parallelism can be achieved via grinding, while

the grinding efficiency will fall accordingly and vice versa. Therefore, the sandpaper Ф 9" (225mm)

is recommended upon actual needs.

Warning ： Prior to the sandpaper replacement or installation, do read safety precautions and

installation guide carefully.