Aleko 690L Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Шліфувальна машина Aleko 690L. Aleko 690L 12 сторінок. Drywall sander
Також для Aleko 690L: Інструкція з експлуатації (17 сторінок)
Друкувати сторінкуwww.AlekoDrywallSander.com
6. Installation & Sandpaper Replacement (Fig.2)
Fig .2
Note: Prior to installation or removing the sandpaper, make
sure to not only switch off the device, but also cut off the power
supply.
Installation Guide
To ensure the replacement procedures, place the device on the smooth ground prior to installation. Take
the sandpaper from the toolbox, and then fix it onto the disk (see Fig .2). The back of the sandpaper (Item
1) will automatically glue with the disk/adhesive disk (Item 2), making both connection and
conduction available.
In order to promote the grinding efficiency, it is necessary to change the sandpaper after the device has
been operational for a certain period. Firstly, switch off the device and disconnect the socket. Then,
remove the previous sandpaper entirely from the disk, so as to lay new sandpaper neatly as well as
facilitate future replacement. At last, fix new sandpaper in position.
Sandpaper Overview
Grinding towards the target wall and object is possible with abrasive grains and sandpaper twisting upon
operations. The sandpaper is classified into various categories according to its dimensions. It is
recommended to select the sandpaper in accordance with actual size of the disk. The more abrasive
grains included on the sandpaper, the better flatness and parallelism can be achieved via grinding, while
the grinding efficiency will fall accordingly and vice versa. Therefore, the sandpaper Ф 9" (225mm)
is recommended upon actual needs.
Warning ： Prior to the sandpaper replacement or installation, do read safety precautions and
installation guide carefully.
5