Aleko 690L Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Шліфувальна машина Aleko 690L. Aleko 690L 12 сторінок. Drywall sander
Також для Aleko 690L: Інструкція з експлуатації (17 сторінок)
Друкувати сторінкуwww.AlekoDrywallSander.com
2． Voltage
Before connecting electric tool to the socket, make sure that the supply voltage be in accordance with
rated voltage. If the former is greater than latter and the device is powered on by mistake, it may result in
damage of devices and injuries of people. As for indefinite supply voltage of socket, never try to plug for
use. Besides, the damage of devices may also occur if the supply voltage falls below rated voltage.
3. Device Application
As one of our products, the device belongs to the hand-held electric tools.
The device mainly caters for lime surface, including the interior wall, ceiling, exterior wall, corridor, etc.
Remove the painting lime mud from the wall, and make the surface even or smooth. It may promote the
wall grinding efficiency and quality by workers.
With various conditions taken into consideration in the design, the device may run at high or low speed. In
addition, you may adjust the connection structure at high and low locations respectively, in order to
optimize the grinding efficiency and realize user-friendly and compact design.
4. Technical Specifications
Rated Voltage 110V AC
Frequency 60 Hz
Rated Power 600 W
No-load Speed 450-1050 Rpm
Sandpaper Dimensions Ф 9 inches (225 mm)
Safety Standard II / □
Net/Gross Weight 11.7 /23.4 Lb (5.3/10.6 kg)
Length 70/49 inches (1780/1240 mm)
Packing Dimensions 32x14x10 inches (810x360x240 mm）
5．Structure Overview (Fig.1)
Fig .1
1. Joint
2. Connection Plug
3. Switch
4. Governor
5. Interface for Dust Collector
6. Plastic Disk component
7. Sandpaper
Standard Accessories
Sandpaper: 6 pcs Allen Wrench: 1 pcs
Carbon Brush: 2 pcs Telescopic Dust Outlet: 60 inches (1.5 m)
Multi-blade Screwdriver: 1 pcs
4