Clarke Woodworker CBS1-5B 운영 및 유지보수 지침 매뉴얼 - 페이지 11

{카테고리_이름} Clarke Woodworker CBS1-5B에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker CBS1-5B 16 페이지. Belt/disc sander

MAINTENANCE

Always inspect the sander before use.

• Make sure that all air vents are clear.

Check the power cable to ensure it is sound and free from damage. Avoid

using solvents when cleaning plastic parts, (most plastics are susceptible to

damage from the various types of commercial solvents).

All bearings in this tool are lubricated for the machine's lifetime under normal

operating conditions, therefore no further lubrication is required.

1. Remove the screws and clamping

knob indicated

2. Remove the belt cover.

3. Replace the sanding belt ensuring

it sits centrally on the rollers, and

the arrow on the rear of the belt is

pointing down towards he table.

4. Turn the belt by hand and adjust

the tracking knob until the belt is

tracking correctly.

• Clockwise to track the belt to

the right

• Anti-clockwise to track the belt

to the left,

5. Replace the cover screws and

clamping knob.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]