Clarke Woodworker CBS1-5B 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke Woodworker CBS1-5B에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker CBS1-5B 16 페이지. Belt/disc sander

OPERATION

IMPORTANT: Ensure that ALL components are secure, ALL correct

adjustments have been carried out, and ALL safety precautions have been

observed BEFORE plugging the machine into the mains supply and

switching ON.

1. Attach a vacuum cleaner or

other dust extraction device to

the relevant extraction port.

2. Switch the machine ON by

pressing the green START (I)

button.

3. Make sure that the belt is tracking

properly...adjust if necessary.

4. Holding the workpiece firmly,

place it on the table and gently

slide it into contact with the belt or

disc. Do not force it, only a light

pressure is required.

IMPORTANT: When using the sanding

disc, ALWAYS use the left half of the

disc ONLY, i.e. that side where the

direction of rotation of the disc is

down towards the table.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]