Clarke Woodworker CBS1-5B Instrukcja obsługi i konserwacji - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke Woodworker CBS1-5B. Clarke Woodworker CBS1-5B 16 stron. Belt/disc sander
Drukuj stronę
OPERATION
IMPORTANT: Ensure that ALL components are secure, ALL correct
adjustments have been carried out, and ALL safety precautions have been
observed BEFORE plugging the machine into the mains supply and
switching ON.
1. Attach a vacuum cleaner or
other dust extraction device to
the relevant extraction port.
2. Switch the machine ON by
pressing the green START (I)
button.
3. Make sure that the belt is tracking
properly...adjust if necessary.
4. Holding the workpiece firmly,
place it on the table and gently
slide it into contact with the belt or
disc. Do not force it, only a light
pressure is required.
IMPORTANT: When using the sanding
disc, ALWAYS use the left half of the
disc ONLY, i.e. that side where the
direction of rotation of the disc is
down towards the table.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10