Clarke CPP3000B 매뉴얼
{카테고리_이름} Clarke CPP3000B에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPP3000B 2 페이지. Drill-powered pump
페이지 인쇄
Model No: CPP3000B
Drill-Powered Pump
Part No. 7210102
Thank you for purchasing this CLARKE Drill
Powered Pump.
This extremely versatile pump is designed for
use in the home for pumping flooded cellars,
emptying fish tanks, blocked sinks, baths or
washing machines, in the garden for emptying
ponds, or paddling pools, irrigation or transferring
insecticides, on boats for emptying bilge water
etc., and in any operation requiring the transfer of
liquids other than petrol and other flammable
substances, (see Safety Precautions).
The pump is simple to use, but you should never-
theless read this leaflet thoroughly and follow the
instructions carefully. In doing so you will ensure
the safety of yourself and that of others around
you, and you can look forward to the pump giving
you long and satisfactory service.
Guarantee
This CLARKE product is guaranteed against
faulty manufacture for a period of 12 months from
the date of purchase. Please keep your receipt
as proof of purchase. This guarantee is invalid if
the product is found to have been abused or
tampered with in any way, or not used for the
purpose for which it was intended.
Faulty goods should be returned to their place of
purchase. No product can be returned to us
without prior permission. This guarantee does
not affect your statutory rights.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
Specifications
•
Operating Speed Range 2,000 - 3,000 RPM
•
Min. Drill Power rating
•
Capacity
•
Hose Diameter
•
Max. Inlet Head
•
Max. Delivery Head
•
Operating Temp. Range. 5 - 60
* Without filter
WARNING
This pump is not designed for
pumping petrol, paraffin or other
flammable or acid based liquids.
Safety Precautions
•
DO NOT allow the pump to run dry.
•
DO NOT operate at speeds greater than
3,000RPM.
•
DO NOT pump liquids contaminated with
solids, without a filter being fitted to the inlet
hose.
•
In addition to petrol or other flammable liquids,
and acids, or DO NOT pump liquids that leave
a residue upon drying.
•
ALWAYS keep your feet and hands dry when
using the drill pump.
•
ALWAYS ensure the drill is kept dry and is
correctly earthed - preferably use a drill which
is double insulated.
•
Make absolutely sure that there is no
possibility of the pump and drill vibrating its
way into the liquid.
•
As the device is to be used in the close
proximity to water, the drill should always be
connected to the mains supply through a
residual current circuit breaker (RCCB or
RCD).
Contents List
1.
Pump Body
2.
'U' Bolt w/washers and nuts
3.
Gauze Filter
4.
4 x replacement Vane Seals
4.
'O' Ring
350 Watts
40 - 50 litres/min*
20mm (3/4")
2 metres (Water)
15 metres (Water)
O
C