Clarke CSV2A 운영 및 유지보수 지침 매뉴얼 - 페이지 4

{카테고리_이름} Clarke CSV2A에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CSV2A 13 페이지. Submersible water pump
Clarke CSV2A에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄

ELECTRICAL CONNECTIONS

nnect the mains lead to a suitable 110 Volt (50Hz) electrical supply through

an approved plug or a suitably fused isolator switch, or to a suitable portable

110 volt transformer.

We recommend that this pump is fitted with a Residual Current Device (RCD).

If the pump is to be connected to an outdoor electrical supply, ensure both

the plug and the socket are of a British Standard approved waterproo

WARNING: THIS APPLIANCE MUST BE EARTHED

The wires in the mains lead are coloured according to with the following code:

Green & Yellow

As the colours of the flexible power cable of this appliance may not

correspond with the coloured markings identifying terminals in your plug

proceed as follows:

• Connect GREEN & YELLOW wire to the terminal marked with a letter "E" or

Earth symbol '

• Connect BROWN wire to terminal marked with a letter "L" or coloured RED

• Connect BLUE wire to terminal marked with "N" or coloured BLACK

IMPORTANT: If you are in any doubt regarding electrical installation, you should

consult a qualified electrician.

PUMP PERFORMANCE DATA

Earth

Blue

Neutral

Brown

Live

'or coloured GREEN or GREEN & YELLOW.

design.