Clarke CSV2A Handleiding voor bediening en onderhoud - Pagina 4
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CSV2A. Clarke CSV2A 13 pagina's. Submersible water pump
Ook voor Clarke CSV2A: Handleiding voor bediening en onderhoud (17 pagina's)
ELECTRICAL CONNECTIONS
nnect the mains lead to a suitable 110 Volt (50Hz) electrical supply through
Co
an approved plug or a suitably fused isolator switch, or to a suitable portable
110 volt transformer.
We recommend that this pump is fitted with a Residual Current Device (RCD).
If the pump is to be connected to an outdoor electrical supply, ensure both
the plug and the socket are of a British Standard approved waterproo
WARNING: THIS APPLIANCE MUST BE EARTHED
The wires in the mains lead are coloured according to with the following code:
Green & Yellow
As the colours of the flexible power cable of this appliance may not
correspond with the coloured markings identifying terminals in your plug
proceed as follows:
• Connect GREEN & YELLOW wire to the terminal marked with a letter "E" or
Earth symbol '
• Connect BROWN wire to terminal marked with a letter "L" or coloured RED
• Connect BLUE wire to terminal marked with "N" or coloured BLACK
IMPORTANT: If you are in any doubt regarding electrical installation, you should
consult a qualified electrician.
PUMP PERFORMANCE DATA
-
Earth
Blue
-
Neutral
Brown
-
Live
'or coloured GREEN or GREEN & YELLOW.
4
design.
f