Clarke HIPPO 2 운영 및 유지보수 지침 - 페이지 3

{카테고리_이름} Clarke HIPPO 2에 대한 운영 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke HIPPO 2 5 페이지. Submersible pump
Clarke HIPPO 2에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (13 페이지)

페이지 인쇄

Electrical Connections

HIPPO 2 - 240 Volt models:

(50Hz) electrical supply through an approved plug or a suitably fused isolator switch.

HIPPO 2 - 110 Volt models:

(50Hz) electrical supply through an approved plug or a suitably fused isolator

switch, or to a suitable portable 110 volt transformer.

We recommend that this pump is fitted with a Residual Current Device (RCD).

If the pump is to be connected to an outdoor electrical supply, make sure that both

the plug and the socket are of a British Standard approved waterproof design.

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow

As the colours of the flexible cord of this appliance may not correspond with the

coloured markings identifying terminals in your plug proceed as follows:

•

Connect GREEN & YELLOW cord to terminal marked with a letter "E" or Earth

symbol '

'or coloured GREEN or GREEN & YELLOW.

•

Connect BROWN cord to terminal marked with a letter "L" or coloured RED

•

Connect BLUE cord to terminal marked with a letter "N" or coloured BLACK

240 volt models only:

The fuse in the plug for this appliance must be rated at 13 amps.

If this appliance is fitted with a plug which is moulded onto the electric cable

(i.e. non-rewirable) please note:

The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer or most

electrical stockists.

The fuse in the plug must be replaced with one of the same rating (5 amps)

and this replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician.

Connect the mains lead to a standard 240 Volt

Connect the mains lead to a suitable 110 Volt

Earth

Blue

Neutral

Brown

Live