Clarke 3110426 운영 및 유지 관리 지침 - 페이지 9

{카테고리_이름} Clarke 3110426에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 3110426 16 페이지. High speed sabre saw

4. Connect the other end of the hose to the compressor. (A whip hose with a

quick fit coupling is available from your CLARKE dealer).

5. Turn on the air supply and check for air leaks. Rectify any found before

proceeding. The tool is now ready for use.

USEFUL AIRLINE ITEMS FROM THE CLARKE RANGE

CAT150 Mini-Oiler:- Part No 3120164

8mm Rubber Whip Hose:-Part No 3120104

CAT58 6mm Recoil Hose with 1/4"bsp connectors (25 feet):-Part No 3110458

CAT59 6mm Recoil Hose with 1/4"bsp connectors (50 feet):-Part No 3110459

CRH9 9metres professional recoil hose:-Part No 3120100

CAR20PC Manual Air Hose Reel:-Part No 3126250

CAR15PC PVC hose in moulded case with auto re-wind:-Part No 3126000

See the latest catalogue for details of snap couplings & pressure gauges.

OPERATION

1. Slide the safety lock forward.

2. Squeeze the trigger.

• Allow the saw to reach full

speed before use.

3. Release the trigger to stop the

saw. When the blade has stopped

remove it from the workpiece.

4. Release the trigger to stop the tool.

5. Always ensure the tool has

stopped before putting it down.

DISCONNECTING THE AIR SUPPLY

1. Do not disconnect the air supply hose until the air supply has been shut

down and the compressed air released from the hose.

• Refer to the compressor instruction manual for the procedure to shut

down and release the compressed air.

• Once the pressure has been released, disconnect the air supply

hose from the saw.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]