Clarke 3110426 Інструкція з експлуатації та обслуговування - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та обслуговування для Пила. Clarke 3110426. Clarke 3110426 16 сторінок. High speed sabre saw
Друкувати сторінку4. Connect the other end of the hose to the compressor. (A whip hose with a
quick fit coupling is available from your CLARKE dealer).
5. Turn on the air supply and check for air leaks. Rectify any found before
proceeding. The tool is now ready for use.
USEFUL AIRLINE ITEMS FROM THE CLARKE RANGE
CAT150 Mini-Oiler:- Part No 3120164
8mm Rubber Whip Hose:-Part No 3120104
CAT58 6mm Recoil Hose with 1/4"bsp connectors (25 feet):-Part No 3110458
CAT59 6mm Recoil Hose with 1/4"bsp connectors (50 feet):-Part No 3110459
CRH9 9metres professional recoil hose:-Part No 3120100
CAR20PC Manual Air Hose Reel:-Part No 3126250
CAR15PC PVC hose in moulded case with auto re-wind:-Part No 3126000
See the latest catalogue for details of snap couplings & pressure gauges.
OPERATION
1. Slide the safety lock forward.
2. Squeeze the trigger.
• Allow the saw to reach full
speed before use.
3. Release the trigger to stop the
saw. When the blade has stopped
remove it from the workpiece.
4. Release the trigger to stop the tool.
5. Always ensure the tool has
stopped before putting it down.
DISCONNECTING THE AIR SUPPLY
1. Do not disconnect the air supply hose until the air supply has been shut
down and the compressed air released from the hose.
• Refer to the compressor instruction manual for the procedure to shut
down and release the compressed air.
• Once the pressure has been released, disconnect the air supply
hose from the saw.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9