Clarke 6460230 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke 6460230에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6460230 17 페이지. 85 mm plunge saw

2. Use safety equipment. Always wear eye protection. Safety equipment such as

dust mask, non-skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

3. Avoid accidental starting. Make sure that the switch is in the off position before

plugging in. Carrying power tools with your finger on the switch or plugging in

power tools that have the switch on invites accidents.

4. Remove any wrench before turning the power tool on. A wrench left attached

to a rotating part may result in personal injury.

5. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

POWER TOOL USE AND CARE

1. Do not force the power tool. Use the correct accessories for your application.

The correct power tool will do the job better and safer at the rate which it was

designed for.

2. Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be

repaired.

3. Disconnect the plug from the power source before changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle tools out of the reach of children and do not allow persons unfamiliar

with the power tool or these instructions to operate it. Power tools are

dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

6. Use the power tool and accessories in accordance with these instructions and

in the manner intended, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

intended could result in a hazardous situation.

7. The performance of this tool may vary, depending upon variations in line

voltage. Extension cable usage may also affect performance.

SERVICE

1. Have your power tool serviced by qualified service personnel using only

identical replacement parts. This will ensure that the safety of the power tool is

maintained.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]