LEGO Mindstorms EV3 사용자 설명서 - 페이지 30

{카테고리_이름} LEGO Mindstorms EV3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. LEGO Mindstorms EV3 36 페이지.
LEGO Mindstorms EV3에 대해서도 마찬가지입니다: 지침 (5 페이지)

EV3 TECHNOLOGY

EV3 Brick Interface

BRICK DATALOG

The EV3 Brick comes with a simple-to-use, on-brick data logging

application. These instructions provide you with the basic information

you will need to get started.

Main screen

When you open the EV3 Brick Datalog app, you will see to the left

a Graph Area. If a sensor or motor is connected to the EV3 Brick,

a graph will show live readings from one of the sensors like an

oscilloscope (if a motor is connected, it is readings from the in-build

rotation sensor).

To the right of the graph, the following numbers are displayed (from

the top): actual reading, duration, highest reading, lowest reading,

and average reading. Duration will only be shown when running an

experiment—not when in Oscilloscope Mode.

Underneath, a small window will indicate what port the values are

currently read from (Input Port 1, 2, 3, or 4, or Output Port A, B, C,

or D). To change the port, use the Left and Right buttons to click

through the available ports.

LEGOeducation.com

LEGO, the LEGO logo, MINDSTORMS and the MINDSTORMS logo are trademarks of the/

Main screen

NOTE:

Only ports with

a sensor or motor

connected will be

displayed!