LEGO Mindstorms EV3 Посібник користувача - Сторінка 30
Переглянути онлайн або завантажити pdf Посібник користувача для Навчальне обладнання LEGO Mindstorms EV3. LEGO Mindstorms EV3 36 сторінок.
Також для LEGO Mindstorms EV3: Інструкція (5 сторінок)
Друкувати сторінку
EV3 TECHNOLOGY
EV3 Brick Interface
BRICK DATALOG
The EV3 Brick comes with a simple-to-use, on-brick data logging
application. These instructions provide you with the basic information
you will need to get started.
Main screen
When you open the EV3 Brick Datalog app, you will see to the left
a Graph Area. If a sensor or motor is connected to the EV3 Brick,
a graph will show live readings from one of the sensors like an
oscilloscope (if a motor is connected, it is readings from the in-build
rotation sensor).
To the right of the graph, the following numbers are displayed (from
the top): actual reading, duration, highest reading, lowest reading,
and average reading. Duration will only be shown when running an
experiment—not when in Oscilloscope Mode.
Underneath, a small window will indicate what port the values are
currently read from (Input Port 1, 2, 3, or 4, or Output Port A, B, C,
or D). To change the port, use the Left and Right buttons to click
through the available ports.
LEGOeducation.com
LEGO, the LEGO logo, MINDSTORMS and the MINDSTORMS logo are trademarks of the/
sont des marques de commerce de/son marcas registradas de LEGO Group. ©2013 The LEGO Group. 041329.
Main screen
NOTE:
Only ports with
a sensor or motor
connected will be
displayed!
30