Clarke XR160 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke XR160에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke XR160 17 페이지. Diesel/paraffin heaters
Clarke XR160에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (17 페이지)

페이지 인쇄
Clarke XR160 운영 및 유지보수 지침 매뉴얼
OPERATING INSTRUCTIONS

HEATER START UP

1. Make sure power switch is in the
OFF position.
2. Turn thermostat to lowest setting.
3. Plug the heater into the mains
power supply.
4. Turn the thermostat to highest
setting.
5. Start heater by setting the power
switch to the ON position.
• The switch illuminates in the ON position.
6. Adjust thermostat to desired setting.
NOTE: Heater will cycle on/off as heat is required.

HEATER SHUT DOWN

1. Set the power switch to the OFF
position.
2. For extended shutdown, unplug
the heater from the mains supply.
BEFORE STORAGE
• Clean the heater as described
in the MAINTENANCE section.
• We recommend completely
filling the tank with fuel for
extended storage to minimize condensation inside the tank.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9