Clarke XR160 Instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Grzałka Clarke XR160. Clarke XR160 17 stron. Diesel/paraffin heaters
Również dla Clarke XR160: Instrukcja obsługi i konserwacji (17 strony)
Drukuj stronę
OPERATING INSTRUCTIONS
HEATER START UP
1. Make sure power switch is in the
OFF position.
2. Turn thermostat to lowest setting.
3. Plug the heater into the mains
power supply.
4. Turn the thermostat to highest
setting.
5. Start heater by setting the power
switch to the ON position.
• The switch illuminates in the ON position.
6. Adjust thermostat to desired setting.
NOTE: Heater will cycle on/off as heat is required.
HEATER SHUT DOWN
1. Set the power switch to the OFF
position.
2. For extended shutdown, unplug
the heater from the mains supply.
BEFORE STORAGE
• Clean the heater as described
in the MAINTENANCE section.
• We recommend completely
filling the tank with fuel for
extended storage to minimize condensation inside the tank.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9