Clarus Technologies PCS-35 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Clarus Technologies PCS-35에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarus Technologies PCS-35 13 페이지. Agitating cleaning stations

tampered with by unauthorized persons, misused, abused, or improperly installed and

has been used in accordance with the instructions and/or ratings supplied.

This 1 year Mechanical/Electrical Component Warranty covers the following

components:

 Electrical control systems

 Pneumatic system

 Main pump

NOTE:

Consumable items such as light bulbs, O-Rings and filters are excluded

from any such warranty.

IV.

SAFETY

To safely operate the Clarus Parts Washer, it is essential to know the proper safety

procedures and equipment.

The definitions for the safety warnings used throughout this manual are as follows:

Warning

Means that if the safety information is not followed, personnel,

equipment or the environment may be damaged or hurt.

Material Safety Data Sheets (MSDS)

The MSDS provides technical information regarding use, hazards, precautions and

emergency procedures related to specific fluids. The MSDS also contain toll-free phone

numbers that may be called to provide further safety and emergency treatment

information.

Operators of the Clarus Parts Washer must have on hand an MSDS for each type

of solvent that they will be using. The MSDS are available from the solvent supplier.

In some localities it is required by law that appropriate MSDS are on hand whenever

hazardous or flammable material is being processed.

1. Safety Glasses. Operators should wear safety glasses during the operation of the

Parts Washer. The major hazard is the possibility of splashing petroleum-based

fluids into the eye. If petroleum-based fluid is splashed into the eye, severe

damage may occur. First Aid treatment should be initiated immediately. Refer

to MSDS.

2. Protective Gloves. Appropriate protective gloves should be worn whenever there

is a possibility that the fluids being used may come into contact with the hands.