DirekTronik SX-SWE01B 운영 매뉴얼 - 페이지 15

{카테고리_이름} DirekTronik SX-SWE01B에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DirekTronik SX-SWE01B 20 페이지. Mixed input type-c vga hdmi, hdmi 2.0 hdbaset switch, support 4k@60hz yuv4:4:4, 18gbps, hdr

페이지 인쇄

Operating Instruction

10. Command Control

Control software operation:

The serial control software is illustrated with SSCOM32 as an example. Basic Settings:

Double-click the software in the installation package to run specifically (as shown in figure 1 ) and

install the RS232 software on the computer.

Enter the main interface of the software, as shown in the figure below.

Please use USB to RS232 cable connect PC and device,open RS232 software.

In the parameter configuration area, select the serial number that the serial port connect with PC, and set

the baud rate of the communication protocol: 115200 (default), data bits: 8. Stop bits: 1, Parity: None,

you can input the instruction in the command input area and control the machine or remote receiver.