CLAS OM 8021 매뉴얼 - 페이지 9

{카테고리_이름} CLAS OM 8021에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLAS OM 8021 13 페이지. Transmission puller fork renault

OM 8021

TRANSMISSION PULLER FORK RENAULT

INSTRUCTIONS

After having raised the car, removed the wheel, disconnected the hub and the shock absorber, position the tool

complete with puller and fork (fig. 2)

The fork must be screwed to the slide hammer puller, and with a retaining nut (fig. 3)

Make sure that all the threads are engaged, the nut can also be screwed over the threaded hole of the fork.

For drive shaft removal.

After placing the fork behind the drive shaft, make one or two precise hits with the slide hammer, keeping the tool

in a horizontal position. (fig. 4)

Unhook the drive shaft (the retaining ring mounted on the splined coupling must come out of its housing.

(Fig. 5-6)

Remove the tool and detach the drive shaft from the transmission/differential.