CLAS OM 8021 매뉴얼 - 페이지 8

{카테고리_이름} CLAS OM 8021에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLAS OM 8021 13 페이지. Transmission puller fork renault

CLAS OM 8021 매뉴얼
OM 8021
TRANSMISSION PULLER FORK RENAULT
PRECAUTION: indicates correct operating or maintenance procedures to avoid damage to the equipment or to the
surrounding environment:
-
Check the correct operation of the tool and its integrity
-
Remove any dirt from components to be disassembled
-
Carry out the operation to remove the drive shaft with the engine cold.
WARNING: indicates a potential hazard that requires putting into practice the correct procedures to avoid accidents:
When using the drive shaft puller, always wear personal protective equipment (gloves, safety goggles with side
-
shields, safety shoes and work clothing).
DANGER: indicates a situation in which an action or lack of action may cause serious personal injury or even death:
-
Finger crushing hazard between the handle and the slide hammer.
-
Danger of falling or loss of balance if the fork is not properly hooked behind the drive shaft when removing, due to
excessive force used with the slide hammer when removing, or due to incorrect tool handling.
-
Tool falling on the body, especially the lower limbs.
APPLICATION
Renault: Twingo, Clio, Kangoo, Capture, Megane, Scenic, Talisman
Dacia: Sandero, Logan, Duster, Lodgi, Dokker
Ford, Mazda, Volvo, etc.

APPLICATION AREA

The mechanical properties, the shape and dimensioning for which it was designed ensure that Govoni drive shaft
disassembly tool can be used in the automotive sector for:
-
Removing the drive shaft from the transmission/differential (fig. 1)

TECHNICAL SPECIFICATIONS

Fork housing diameter
Fork ball bearing distance
Fork threaded connection
Total length
Slide hammer weight
Complete tool weight
Ø55 mm
74 mm
M18x1.5
777 mm
3 Kg
5.5 Kg
1