CLAS OM 8021 Manual - Page 8

Browse online or download pdf Manual for Service Equipment CLAS OM 8021. CLAS OM 8021 13 pages. Transmission puller fork renault

Print Page

OM 8021

TRANSMISSION PULLER FORK RENAULT

PRECAUTION: indicates correct operating or maintenance procedures to avoid damage to the equipment or to the

surrounding environment:

Check the correct operation of the tool and its integrity

Remove any dirt from components to be disassembled

Carry out the operation to remove the drive shaft with the engine cold.

WARNING: indicates a potential hazard that requires putting into practice the correct procedures to avoid accidents:

When using the drive shaft puller, always wear personal protective equipment (gloves, safety goggles with side

shields, safety shoes and work clothing).

DANGER: indicates a situation in which an action or lack of action may cause serious personal injury or even death:

Finger crushing hazard between the handle and the slide hammer.

Danger of falling or loss of balance if the fork is not properly hooked behind the drive shaft when removing, due to

excessive force used with the slide hammer when removing, or due to incorrect tool handling.

Tool falling on the body, especially the lower limbs.

APPLICATION

Renault: Twingo, Clio, Kangoo, Capture, Megane, Scenic, Talisman

Dacia: Sandero, Logan, Duster, Lodgi, Dokker

Ford, Mazda, Volvo, etc.

APPLICATION AREA

The mechanical properties, the shape and dimensioning for which it was designed ensure that Govoni drive shaft

disassembly tool can be used in the automotive sector for:

Removing the drive shaft from the transmission/differential (fig. 1)

Fork housing diameter

Fork ball bearing distance

Fork threaded connection

Total length

Slide hammer weight

Complete tool weight

Ø55 mm

74 mm

M18x1.5

777 mm

3 Kg

5.5 Kg