CTS CVT-3012SFP 사용자 설명서 - 페이지 4
{카테고리_이름} CTS CVT-3012SFP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CTS CVT-3012SFP 19 페이지. 10/100/1000base-t to 1000base-x (sfp slot)
standalone media converter
CTS CVT-3012SFP에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)
페이지 인쇄
1. INTRODUCTION
Thank you for choosing the 10/100/1000Base-T to 1000Base-X (SFP Slot) Managed
Converter. The built-in management module allows users to configure this Managed
Converter and monitor the operation status locally.
1.1 Front Panel & Real Panel
1.2 Management Preparations
Before you can manage your Managed Converter locally, you need to use the appropriate
network cable to connect your converter. It is extremely important that your cable must have
the correct pin arrangement and the proper cable types are used when connecting the
Managed Converter to other switches, hubs, workstations, etc. The following sub-sections
introduce you to the different port types used in this Managed Converter.
1000Base-X Combo SFP Port
The small form-factor pluggable (SFP) is a compact optical transceiver used in optical
data communications applications. It interfaces a network device mother board (for a
switch, router or similar device) to a fiber optic or unshielded twisted pair networking
cable. It is a popular industry format supported by several fiber optic component
vendors.
SFP transceivers are available with a variety of different transmitter and receiver
types, allowing users to select the appropriate transceiver for each link to provide the
required optical reach over the available optical fiber type. SFP transceivers are also
Figure 1: CVT-3012SFP Front Panel
Figure 2: CVT-3012SFP Rear Panel
4