CTS CVT-3012SFP Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów CTS CVT-3012SFP. CTS CVT-3012SFP 19 stron. 10/100/1000base-t to 1000base-x (sfp slot) standalone media converter
Również dla CTS CVT-3012SFP: Podręcznik użytkownika (2 strony)

Drukuj stronę

1. Front Panel & Real Panel

1. INTRODUCTION

Thank you for choosing the 10/100/1000Base-T to 1000Base-X (SFP Slot) Managed

Converter. The built-in management module allows users to configure this Managed

Converter and monitor the operation status locally.

1.1 Front Panel & Real Panel

1.2 Management Preparations

Before you can manage your Managed Converter locally, you need to use the appropriate

network cable to connect your converter. It is extremely important that your cable must have

the correct pin arrangement and the proper cable types are used when connecting the

Managed Converter to other switches, hubs, workstations, etc. The following sub-sections

introduce you to the different port types used in this Managed Converter.

1000Base-X Combo SFP Port

The small form-factor pluggable (SFP) is a compact optical transceiver used in optical

data communications applications. It interfaces a network device mother board (for a

switch, router or similar device) to a fiber optic or unshielded twisted pair networking

cable. It is a popular industry format supported by several fiber optic component

vendors.

SFP transceivers are available with a variety of different transmitter and receiver

types, allowing users to select the appropriate transceiver for each link to provide the

required optical reach over the available optical fiber type. SFP transceivers are also

Figure 1: CVT-3012SFP Front Panel

Figure 2: CVT-3012SFP Rear Panel